Brocks-performance ShortMeg 2 Full System 12'' Muffler Hond User Manual download pdf

Document ID 994770

Brock’s Performance • 4064 E. Patterson Road • Dayton, OH 45430 • Phone: 937-912-0054 • Fax: 937-912-0062

HONDA GROM (2014) ALIEN HEAD 2 / SHORTMEG 2

FULL EXHAUST INSTALLATION INSTRUCTIONS

Check Package Contents: The Alien Head 2™ or ShortMeg 2™

system package contents include:

1. One Header Mounting Flange

2. One Header

3. One Alien Head 2™ or ShortMeg 2™ Muffler

4. One Muffler Mounting Bracket

5. Package Containing Springs, Spring-puller, and

Mounting Hardware

If any parts are missing, please contact Brock’s Performance.

Remove the Stock Exhaust System:

Be sure the bike is

completely cool before starting the installation.

Remove the muffler

heat shield bolt (1) and slide shield forward to release. Loosen the

exhaust clamp (2) that secures the muffler to header connection.

Remove the two muffler-mount bolts (3 & 4) and carefully remove

the muffler. Remove the bolt (5) holding the rear of the header.

Support the stock header and remove the header nuts (6 & 7) to

completely remove header.

Note: The stock exhaust gasket will

be reused, but inspect and replace if necessary.

Install Muffler Mounting Bracket: Remove the two bolts (8 & 9)

holding the brake reservoir to the rear set. Position the bracket on

the outside of the reservoir and reinstall the stock bolts (10 ft-lb.)

Install the Brock’s Performance Exhaust System: Using the

supplied nuts (10 & 11), install the header-mounting flange. Do

not over tighten; max recommended torque (10 ft-lb.) Install the

header and attach spring from flange to header. Install the muffler

onto the header and use the supplied hardware to secure to the

muffler-mounting bracket (12) loosely. Attach the spring from the

muffler to header and adjust the system by hand as required to

ensure proper clearance. Tighten the muffler-mounting bolt securely

to the bracket (10 ft-lb.)

Check, Clean, Ride: Before starting the motorcycle check for proper

clearance between all components (suspension, bodywork, engine,

etc.) Wipe the entire exhaust system with rubbing alcohol to remove

any oil/fingerprints prior to starting. Enjoy your new Brock’s

Performance exhaust system.

All Brock’s Performance products are designed for closed-course racetrack use ONLY!!

For more information on Brock’s Performance Warranty and Terms and Conditions:

www.BrocksPerformance.com

> About Us > Terms and Conditions

For Questions and Comments:

www.BrocksPerformance.com > Customer Service > Contact Us

or call the Tech Line 937-912-0054

For Questions and Comments: 1

Summary of Contents

Page 1 - For Questions and Comments:

Document ID 994770 ! !!!!!Brock’s Performance • 4064 E. Patterson Road • Dayton, OH 45430 • Phone: 937-912-0054 • Fax: 937-912-0062 !HONDA GROM (

Comments to this Manuals

No comments

Brocks-performance ShortMeg 2 Full System 12'' Muffler Hond User Manual

Browse online or download User Manual for For the car Brocks-performance ShortMeg 2 Full System 12'' Muffler Hond. Brocks Performance ShortMeg 2 Full System 12'' Muffler Honda Grom (14-up) User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Brocks-performance ShortMeg 2 Full System 12'' Muffler Hond