Brocks-performance Adjustable Billet Kickstand S1000RR (10-14) & User Manual

Browse online or download User Manual for Accessories for video Brocks-performance Adjustable Billet Kickstand S1000RR (10-14) & . Brocks Performance Adjustable Billet Kickstand S1000RR (10-14) & HP4 Road Style User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
DOCUMENT ID 992807
Page 1 of 1
Billet Adjustable Kickstand Installation Instructions
for the BMW S 1000 RR
The Brock’s Performance Billet Adjustable Kickstand is designed to replace the S 1000 RR OEM
kickstand, with no modifications required, using the OEM hardware. This kickstand provides the
adjustability needed with lowered suspension.
REMOVE OEM KICKSTAND
Securely support the bike on a swing arm stand.
Remove the retaining ring from the kickstand switch and slide the switch off. See figure 1.
Remove the spring from the kickstand; it is easiest to remove when the stand is in the up position.
Using a spring hook, pull the spring from the stud.
See figure 2.
Remove the pivot bolt from the rear with a T50 Torx
bit. See figure 3.
INSTALL BILLET ADJUSTABLE KICKSTAND
Remove the stopper cushion from the OEM kickstand
and insert into the Billet Adjustable Kickstand. See
figure 4.
Apply grease to the inside mounting faces of the Billet
Adjustable Kickstand and to the pivot bolt.
Install the kickstand and torque the bolt to 35 Nm
(25.8 ft-lb).
Replace the spring and kickstand switch.
ADJUST KICKSTAND LENGTH
Adjust the length of the kickstand to have adequate
lean when parking the bike. Apply a removable thread
locker to the (2) length adjusting bolts and torque to
7 Nm (62 in-lb).
Brock’s Performance Products are designed for Closed-Course Racetrack use ONLY!
For more information go to www.BrocksPerformance.com, click: Installation Instructions
Email: Advice@BrocksPerformance.com or call: 937-912-0054
Brock’s Performance Products policies and warranty information: www.BrocksPerformance.com, click: Policies
Brock’s Performance Products • 4064 East Patterson Road • Dayton, OH 45430 • Phone: 937-912-0054 • Fax: 937-912-0062
Figure 2
Figure 1
Figure 2
Figure 2
Figure 3
Figure 4
Page view 0
1

Summary of Contents

Page 1

DOCUMENT ID 992807 Page 1 of 1 Billet Adjustable Kickstand Installation Instructions for the BMW S 1000 RR The Brock’s Performance Billet Adjustab

Comments to this Manuals

No comments